HIGHTEC DPF & GPF CLEANER / DPF & OPF REINIGER 400ML

22015-0004 / HIGHTEC DPF & GPF CLEANER / DPF & OPF REINIGER

The cleaner for particle filters of diesel and gasoline motors to remove deposits. Also suitable for applications in intake passages and VTG turbochargers. Allow to take effect for 20 to 40 minutes.

Application in particle filters for diesel or gasoline motors:
Remove the pressure sensor in front of the particle filter and inject HIGHTEC DPF & GPF CLEANER / DPF & OPF REINIGER via the tube included in the delivery. In doing so, hold the injection tube in direction of the particle filter and inject abundant foam. Allow the foam to take effect for 20 to 40 minutes. Then run the vehicle at moderate speed for about 5 km. Alternatively, run the vehicle for 3 to 10 minutes when it is stationary and while doing that move the rotational speed up and down between idle run and 2000 – 3000t/min. Repeat the procedure when heavily soiled.

Application in the intake system:
Spray HIGHTEC DPF & GPF CLEANER / DPF & OPF REINIGER into the intake passage with the tube included in the delivery. Inject (designation) with brief pushes of the nozzle while pulling out the tube. Allow the foam to take effect for 20 to 40 minutes. Then run the vehicle when it is stationary as described above or drive the vehicle and repeat the procedure when heavily soiled.

Application in VTG turbocharger:
Abundantly spray HIGHTEC DPF & GPF CLEANER / DPF & OPF REINIGER into the VTG turbocharger while permanently moving the VTG adjustment manually. Allow to take effect for 20 to 40 minutes and then repeat the procedure.